District Heating & Cooling & Thermal Energy Storage (DHC & TES) 

Steering Committee (part of RHC Board): 

  • Chair: Ralf-Roman Schmidt, AIT Austrian Institute for Technology
  • Vice-Chair: Abdulrahman Dahash, AIT Austrian Institute for Technology

Management of the group:

Laura Fernandes Junasová, Euroheat & Power 

 

The District Heating and Cooling and Thermal Energy Storage Technology Panel of the RHC-Platform was launched in July 2018.

District Heating and Cooling (DHC) is a proven solution for delivering heating, hot water and cooling services through a network of insulated pipes, from a central point of generation to the end user. DHC networks are well suited to supply locally available, renewable and low-carbon energy; solar thermal and geothermal heat, waste heat from industry and commercial buildings, heat from combined heat and power plants. The ability to integrate diverse energy sources means customers are not dependent upon a single source of supply. By aggregating a large number of small and variable heating and cooling demands, District Heating and District Cooling allow energy flows from multiple RES to be combined while reducing primary energy demand and carbon emissions in the community served.

Thermal energy storage (TES) is the solution for a key bottleneck against the widespread and integrated use of RES, since the renewable supply does not always coincide with the demand for heating or cooling, and electricity. Numerous technologies in sensible, latent or thermochemical form can time-shift renewable energy supply to periods of greatest demand, each of them characterised by different specifications and specific advantages. TES contributes to energy system integration, offering flexibility to the wider energy system and storage of variable renewable electricity.

 

Objectives of the Districts HWG (agreed by the members in September 2026) 

  • Identify and prioritise technolog and R&I needs for the transition towards sustainable, renewable and increasingly integrated district heating and cooling systems.   
  • Support the development and deployment of next-generation DHC technologies, including 4th and 5th generation, low-temperature, decentralised and flexible systems, thermal energy storage, subsurface technologies (e.g. energy geostructures – energy piles).   
  • Advance the development and integration of thermal energy storage with DHC, including short- and long-duration storage, underground thermal energy storage, innovative materials, monitoring and the repurposing of existing infrastructure for storage.   
  • Explore the role of DHC and TES in energy-system flexibility and sector coupling, including electricity-market integration, demand-side flexibility and energy management.   
  • Address digitalisation and advanced control, including digital tools, monitoring, automation, digital twinning, MPC and AI applications for DHC and TES.   
  • Identify technological pathways for integrating renewable energy and excess/waste heat, including heat pumps, data centers and other renewable heat sources (e.g., energy geostructures).   
  • Assess technology maturity, performance, costs and replication potential and identify gaps requiring further R&I.   
  • Bring together industry, utilities, research organisations and technology providers to identify innovation needs and opportunities for collaboration.   
  • Strengthen cooperation with other RHC-ETIP Technology Panels and relevant IEA TCPs, avoiding duplication and building on existing R&I work.   
  • Translate identified technology needs into strategic R&I priorities and recommendations, including contributions to the SET Plan SRIAs, Horizon Europe and other relevant programmes.   

  

Active members of the group: 

  1. Adrian Mota Babiloni, Universitat Jaume I 
  2. Ana Vieira, National Laboratory of Civil Engineering 
  3. Andy Frew, Thermacad Energy Consultancy 
  4. Angel Bianco, IPM SOLUTIONS 2018 S.L. 
  5. Anil Kumar, Indian Institute of Technology Jodhpur 
  6. Antonio Gagliano, University of Catania 
  7. Aoife Braiden, RML 
  8. Barbara Marchetti, università degli studi ecampus 
  9. Bernd van den Brekel, Canopus Drilling Solutions Geothermal 
  10. Bertrand Guillemot, Dalkia 
  11. Bijan Adl Zarrabi, Chalmers 
  12. Birol Kilkis, OSTIM Technical University 
  13. Björn Palm, KTH Royal Institute of Technology 
  14. Borja Flagg Díaz, SoleaHeat 
  15. Bulent Yesilata, AYBÜ 
  16. Charles MARAGNA, BRGM 
  17. Christian Doczekal, Güssing Energy Technologies GmbH 
  18. Damir Djakovic, University of Nivi Sad Faculty of Technical Sciences 
  19. Daniel Friedrich, University of Edinburgh 
  20. Darwin Lameris, Gemeente Heemskerk 
  21. David Kecskemeti, Hungarian District Heating Association 
  22. Dirk Mangold, Solites 
  23. Dominika Lange, COGEN Europe 
  24. Dragostin Catalin, energy-serv srl 
  25. Fabian Sander, Centria University of Applied Sciences 
  26. Francesco Rizzi, Scuola Superiore Sant’Anna 
  27. Gabriel Zsembinszki, University of Lleida 
  28. Gerfried Cebrat, effiziente.st Energie- und Umelrconsulting e.U. 
  29. Glenn Reynders, KU Leuven – EnergyVille 
  30. Giuseppe Mandrone, University of Torino (ITA) 
  31. Hakan Ibrahim Tol, AEE INTEC 
  32. HAKKI TIGLI, EHT Venlo BV 
  33. Harald Drueck, IGTE University of Stuttgart 
  34. Hrvoje Dorotić, Energy Institute Hrvoje Požar (EIHP) 
  35. Igor Varavva, ETC Avtomatika 
  36. Irapua Santos Ribeiro, Thermodemand Consulting 
  37. Jan Jette Blangé, Canopus Drilling Solutions Geothermal 
  38. Kapil Chand Singhal, B P Refcool 
  39. Kashif Mushtaq, Iberian Center for Research in Energy Storage CIIAE 
  40. Kenneth Hoffmann, GEA Heating and Refrigeration Technologies
  41. Konstantinos kiriakopoulos, Dsitrict Heating company of amindeo (DHCA) 
  42. Lorenzo Talluri, Università degli Studi di Firenze 
  43. Luisa F. Cabeza, University of Lleida 
  44. Marc Schreurs, DAIKIN EUROPE NV EDC 
  45. Marco Calderoni, R2M Solution 
  46. Marco Pellegrini, University of Bologna 
  47. Maria Capogreco, Freelance Engineer 
  48. Maria Koukou, National and Kapodistrian University of Athens 
  49. Markku Huhtinen, Savonia UAS 
  50. Marta Gurin, CEWEP 
  51. Mitchell NewDelman, None 
  52. Monica Arnaudo, Siemens 
  53. Monika Krasteva, Howest 
  54. Oliver Buchan, Oliveris Tech Incubator 
  55. Peter Dannbring, DHC-Advisory AB 
  56. Ramanunni Parakkal Menon, German Aerospace Centre (DLR) 
  57. Raúl Robledo-Cabezuela, CADE Soluciones de Ingeniería. 
  58. Saeed Mohammadi, Autonomous Building LTD 
  59. Stefan Schuessler, Solstice Advanced Materials 
  60. Stefano Spinaci, European Parliament 
  61. Thomas Schleker, European Commission 
  62. Traonvouez Luc, INSULA France 
  63. Uli Jakob, Dr. Jakob energy research GmbH & Co. KG 
  64. William Davis, Insight Media Group Ltd 
  65. Willy Villasmil, HSLU – Lucerne University of Applied Sciences 
  66. Zhuolun Chen, UNEP